|
CAMaster is proud to announce that we are offering a two day training session here in Cartersville, GA on Thursday and Friday, October 22nd and 23rd, 2015. The training session will be held just a few minutes from our facility at the Clarence Brown Conference Center (Pine Log Classroom) located at 5450 State Route 20 Cartersville, GA 30121. The training session will be a mix of classroom time and "at the machine" type demonstrations.
In order to better serve and train the attendees, we require that attendees meet the following criteria:
- Must be a current CAMaster machine owner/operator or have a machine on order.
- Must have a copy of either; Vectric Cut2D, VCarve Pro or Aspire.Please note that this particular training session does not include Aspire 3D training but will include the 2D vector and toolpath tools that are included in Aspire.
- Must have a copy of the software installed on a laptop that they will use during the training session.
This is the last class for 2015
Class Topics: (Thursday)
(Morning)
CAMaster Operation & WinCNC Startup:
Covers the operation of your CAMaster machine, including initial startup of a new machine and includes many of the most often used commands required for daily operation.
CAMaster Maintenance, Adjusting & Calibrating:
Covers routine, and possibly not so routine maintenance operations and adjustments, schedules for those items and some checks to make sure your machine is calibrated and cutting at its best.
Multi Tool Operation with FTC, ATC or X-3:
Covers the fine points of multi tool use on a CAMaster and the WinCNC macros that operate behind the scenes to allow these actions to take place.
(Afternoon)
CAMaster CNC Basics
This session is tailored around getting users information about the how and why about all things CNC related. Feeds, Speeds, Bits, Materials, Hold Down, and how they all can apply to your machine with your products. Bring your problem files!
Cut 2D, VCarve Pro Design and Import.This class will cover (from the beginning) 2D File creation, material setup, vector line, shape and text creation, import and modification using the "Create, Transform, Edit and Offset" options available in Cut 2D, VCarvePro and Aspire.
Class Topics: (Friday)
(Morning)
This class will cover selection of vectors, material setup, bit selection, feed and speed settings and toolpath creation and saving using the options available in Cut2D. Strategies for virtually all 2D & 2.5D options will be discussed.
Note: Vector creation, transform and toolpath options available in Cut2D are an exact subset of those in VCarve Pro and are taught together.
(Afternoon)
This class covers the 2.5D toolpath operations available in VCarve Pro that are not available in Cut 2D, including V carving, fluting, prism carving and textures.
Advanced Toolpath Testing: (How to Get the Right Tool and Speeds for the Job)
This class explains the difference between the different types and styles of bit geometries and how to get these different bits cutting properly for your material and machine.
Hold Down (Vacuum and Fixtures) & Strategies:
Includes use of vacuum, spoil boards, masks and jigs for parts location with vacuum. Also the same as it applies to T slots, sacrificial holding fixtures and special purpose, high vacuum fixtures.
Cost and Registration:
$350 per person for the two day session. Lunch will be provided. Seats are limited to ensure small class size.
Class times are as follows for both days:
8:30 - 9:00 AM Coffee
9:00 - 12:00 AM Training Session
12:00 - 1:00 PM Lunch
1:00 - 4:30 PM Training Session
To register online, click here: Click to Register
Once you have filled in the registration form, you may pay for the training by calling in to CAMaster at (770) 334-2448 Ext 201 and paying with a credit card. Seats for this session will be on a first come, first served basis, based on actual payment date, not registration date. |
|
Aucun commentaire:
Enregistrer un commentaire