I have a Delta 14" closed stand band saw model 28-203 with a 52-963 base. It was supplied with a 3/4hp 1725 rpm motor. I have installed the riser kit.
I would like to replace the motor with a 1 1/2hp or 2hp motor. People whose judgement and experience I trust have suggested this for resawing.
I would be grateful for suggestions of the manufacturer/model of a 1 1/2 hp or 2hp electric motor that would fit in the enclosed stand. 220V or 110V are both OK. Delta supplies their current bandsaws with a 1hp motor, and they have been unable to help. The manufacturer of the original motor suggested a replacement motor that turned out not to fit (it was too long). So, rather than spin my wheels on this anymore, I am turning to the best source for information.
I would like to replace the motor with a 1 1/2hp or 2hp motor. People whose judgement and experience I trust have suggested this for resawing.
I would be grateful for suggestions of the manufacturer/model of a 1 1/2 hp or 2hp electric motor that would fit in the enclosed stand. 220V or 110V are both OK. Delta supplies their current bandsaws with a 1hp motor, and they have been unable to help. The manufacturer of the original motor suggested a replacement motor that turned out not to fit (it was too long). So, rather than spin my wheels on this anymore, I am turning to the best source for information.
Replacing Delta bandsaw with 1 1/2hp or 2hp motor
Aucun commentaire:
Enregistrer un commentaire