Looking for help from a Hammer A3-31 owner

Hello,

I just took delivery of a new Hammer A3-31 and spent part of the day getting off the pallet and setting it up. All has gone pretty well except there was no documentation with the aluminum extrusion accessory table extension, and I'm looking for info on how to mount the hardware on it so it will attach to the mating rail. The hardware consists of three nuts and assorted bolts, washers, a crank handle, a steel plate and a short length of steel rod. I had no trouble mounting the two rails, one on the jointer infeed, and the other on the planer outfeed.

Attached is a photo of the table extension and the hardware bag.

Even a photo of the underside of someone else's assembled table extension would probably give me all I need to know.

By the way, the A3-31 looks to be a very well made and robust machine.

Thanks in advance,

Glenn

Hammer table extension hardware.JPG

This entry passed through the Full-Text RSS service - if this is your content and you're reading it on someone else's site, please read the FAQ at http://ift.tt/jcXqJW.

Looking for help from a Hammer A3-31 owner