The second WO log was about 25" dia. and just over 8' long, so this one I milled full length. Cutting those two 6/4 cuts out of the center as I did with the first log made the width of the boards cut from the remaining sections around 6" or even less, so this time I took a different approach. I started by taking a slab of the top, turning (with brute strength and awkwardness) the log 90 deg, taking another slab off the top, and then a cut through the center.
If I took the top half off the mill like I did with the 5' long logs I would have had a lot of trouble getting it back up on the mill, so I put two ratchet straps around it and turned it 90 deg again.
So then I started taking 4/4 and 6/4 cuts. I stopped for the night like this.
As I got closer to the center I got some really nice QS boards.
And here's most of the boards before I cut the remaining bark edges off.
After cutting the bark off those that needed it most boards were 8 - 11" wide.
I got some really nice wood out of this log, mostly rift and quarter sawn, which I much prefer with white oak. I'm thinking of some nice A&C style projects a couple years down the road. I'll have plenty of wood.
John
This entry passed through the Full-Text RSS service - if this is your content and you're reading it on someone else's site, please read the FAQ at http://ift.tt/jcXqJW.
More WO MIlling
Aucun commentaire:
Enregistrer un commentaire